From fb09b3d597a3b5797c8a9a3d3129fec09e69bd92 Mon Sep 17 00:00:00 2001
From: Ultrabug <ultrabug@gentoo.org>
Date: Mon, 29 Dec 2014 21:28:48 +0100
Subject: move to html file wrt i3.github.io

---
 doc/py3status.html | 153 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 153 insertions(+)
 create mode 100644 doc/py3status.html

(limited to 'doc/py3status.html')

diff --git a/doc/py3status.html b/doc/py3status.html
new file mode 100644
index 0000000..8d12ef2
--- /dev/null
+++ b/doc/py3status.html
@@ -0,0 +1,153 @@
+---
+layout: default
+title: Docs
+group: Docs
+---
+<div id="content" class="usergen">
+<h1>User-contributed article: enhanced and extensible i3bar with py3status</h1>
+
+<p>
+In the i3 documentation, the recommended tool for <a
+href="http://i3wm.org/docs/userguide.html#_displaying_a_status_line">displaying
+a status line is to use i3status</a> combined with i3bar.
+</p>
+
+<p>
+While i3status is very efficient at what it does, it is by design limited to
+a few modules and does not allow you to inject your own scripts output on your
+i3bar. This is said pretty clearly on the i3status man page:
+</p>
+
+<pre><tt>In i3status, we don’t want to implement process management again.
+Therefore, there is no module to run arbitrary scripts or commands.
+Instead, you should use your shell.</tt></pre>
+
+<h2>Introducing py3status</h2>
+
+<p>
+The goal of py3status is to fill this gap by allowing users to simply extend
+their i3bar while preserving their current i3status configuration. The main idea
+is to rely on i3status' strenghts without adding any configuration on the user's
+side. py3status is thus a wrapper script for i3status and its configuration as
+explained <a href="https://github.com/ultrabug/py3status/wiki">on the wiki</a>.
+</p>
+
+<h2>Usage</h2>
+
+<p>
+Using py3status is easy, no need to multi-pipe your scripts after i3status.
+Instead just replace <i>i3status</i> in your current <b>status_command</b> by
+ <i>py3status</i>.
+For example, if your current status_command in your i3 config file resides in
+~/.i3/i3status.conf, you would change your i3 config to this:
+</p>
+
+<pre><tt>status_command py3status -c ~/.i3/i3status.conf</tt></pre>
+
+<h2>Handle i3bar click events from your i3status.conf</h2>
+
+<p>
+Py3status (since v2) is also wrapping and extending your i3status.conf and
+allows you directly handle all the i3bar click events on any of your configured
+modules whether they are i3status modules or py3status modules.
+</p>
+
+<p>
+To do so, all you have to do is add a new configuration parameter named
+<b>on_click [button number]</b> to your module config and py3status will then
+execute the given i3 command (using i3-msg). This means you can run simple
+tasks like executing a program or execute any other i3 specific command.
+</p>
+<p>Some examples below from i3status.conf:</p>
+
+<pre><tt>
+# reload the i3 config when I left click on the i3status time module
+# and restart i3 when I middle click on it
+time {
+	on_click 1 = "reload"
+	on_click 2 = "restart"
+}
+
+# run wicd-gtk GUI when I left click on the i3status ethernet module
+# and kill it when I right click on it
+ethernet eth0 {
+	# if you use %speed, i3status requires root privileges
+	format_up = "E: %ip"
+	format_down = ""
+	on_click 1 = "exec wicd-gtk"
+	on_click 3 = "exec killall wicd-gtk"
+}
+
+# run thunar when I left click on the / disk info module
+disk / {
+	format = "/ %free"
+	on_click 1 = "exec thunar /"
+}
+
+# open an URL on opera when I left click on the py3status weather_yahoo module
+weather_yahoo paris {
+	cache_timeout = 1800
+	city_code = "FRXX0076"
+	forecast_days = 2
+	on_click 1 = "exec opera http://www.meteo.fr"
+	request_timeout = 10
+}
+</tt></pre>
+
+<h2>Use py3status modules in your i3bar</h2>
+
+<p>
+Py3status (since v2) also comes with some configurable modules you can load and
+configure directly from your i3status.conf just like any other i3status module.
+<a 
+href="https://github.com/ultrabug/py3status/tree/master/py3status/modules">You 
+can see the list of the modules and their configuration parameters here.</a>
+</p>
+
+<p>
+To load a py3status module you just have to list it like any other i3status
+module using the <b>order +=</b> parameter. For example you could insert and 
+load the imap module like this:
+</p>
+
+<pre><tt>
+order += "disk /home"
+order += "disk /"
+order += "imap"
+order += "time"
+</tt></pre>
+
+<p>And then you could configure it like this:</p>
+
+<pre><tt>
+# configure the py3status imap module
+# and run thunderbird when I left click on it
+imap {
+	cache_timeout = 60
+    imap_server = 'imap.myprovider.com'
+    mailbox = 'INBOX'
+    name = 'Mail'
+    password = 'coconut'
+    port = '993'
+    user = 'mylogin'
+    on_click 1 = "exec thunderbird"
+}
+</tt></pre>
+
+
+<h2>Write your own modules to display your own stuff</h2>
+
+<p>
+Py3status features a simple and straightfoward module system which you can use
+to get your own output displayed on your i3bar. You can read more and view some
+examples <a
+href="https://github.com/ultrabug/py3status/wiki/Write-your-own-modules"> on the
+wiki</a>.
+</p>
+
+<h2>Documentation</h2>
+
+<p>
+You can read the full and up to date documentation on the <a
+href="https://github.com/ultrabug/py3status">py3status home page</a>.
+</p>
-- 
cgit v1.3