5 files changed, 154 insertions, 0 deletions
diff --git a/templates/aliases.j2 b/templates/etc_aliases.j2
index a9ac845..a9ac845 100644
--- a/templates/aliases.j2
+++ b/templates/etc_aliases.j2
diff --git a/templates/auth.conf.j2 b/templates/etc_dma_auth.conf.j2
index a1000ea..a1000ea 100644
--- a/templates/auth.conf.j2
+++ b/templates/etc_dma_auth.conf.j2
diff --git a/templates/dma.conf.j2 b/templates/etc_dma_dma.conf.j2
index dfaa04f..dfaa04f 100644
--- a/templates/dma.conf.j2
+++ b/templates/etc_dma_dma.conf.j2
diff --git a/templates/etc_ssh_sshd_config.j2 b/templates/etc_ssh_sshd_config.j2
new file mode 100644
index 0000000..b7ad162
--- /dev/null
+++ b/templates/etc_ssh_sshd_config.j2
@@ -0,0 +1,121 @@
+#	$OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+# Note that some of FreeBSD's defaults differ from OpenBSD's, and
+# FreeBSD has a few additional options.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# Change to yes to enable built-in password authentication.
+# Note that passwords may also be accepted via KbdInteractiveAuthentication.
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable PAM authentication
+#KbdInteractiveAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'no' to disable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the KbdInteractiveAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via KbdInteractiveAuthentication may bypass
+# the setting of "PermitRootLogin prohibit-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and KbdInteractiveAuthentication to 'no'.
+#UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#UseBlacklist no
+#VersionAddendum FreeBSD-20250219
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/libexec/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server
diff --git a/templates/usr_local_etc_rc.d_zpool_gpt_labels.j2 b/templates/usr_local_etc_rc.d_zpool_gpt_labels.j2
new file mode 100644
index 0000000..36bc715
--- /dev/null
+++ b/templates/usr_local_etc_rc.d_zpool_gpt_labels.j2
@@ -0,0 +1,33 @@
+#!/bin/sh
+
+# PROVIDE: zpool_gpt_labels
+# REQUIRE: zfs
+# BEFORE:  LOGIN
+# KEYWORD: nojail
+
+. /etc/rc.subr
+
+name="zpool_gpt_labels"
+rcvar="zpool_gpt_labels_enable"
+start_cmd="zpool_gpt_labels_start"
+
+zpool_gpt_labels_start() {
+	logger "Setting zpool vdev paths to GPT labels"
+	local zpool_status="$(zpool status)"
+	for i in 0 1 2 3; do
+	    local raw="nda${i}p4.eli"
+		local path="/dev/gpt/zfs${i}.eli"
+		case "$zpool_status" in
+		    *"$raw"*)
+				zpool set "path=${path}" zroot "${raw}"
+				logger "Setting ${raw} -> ${path}"
+				;;
+			*)
+			    logger "Skipping ${raw}..."
+				;;
+		esac
+	done
+}
+
+load_rc_config $name
+run_rc_command "$1"